Dr. K. Fazlur Rahman

Dr. K. FAZLUR RAHMAN

  • Department : Mechanical Engineering 
  • Designation: Head of the Department
  • Email: kfrahman@anjuman.edu.in
  • Teaching Experience: 24 years
  • Industry Experience: 2 years

Qualification

COURSES SPECIALIZATION INSTITUTION UNIVERSITY
B.E Mechanical Engineering Osmania University, Hyderabad
M.Tech PEST UBDT College of Engg., Davangere
Kuvempu University
PHD MECH. ENGG
VTU Belagavi VTU Belagavi

Publications

I. INTERNATIONAL JOURNAL
1 Effect of Thermal Ageing on the Coefficient of Thermal Expansion of Al 7075-Silicon Carbide particulate composites Elixir Journal of Mechanical Engineering 48(2012) 9517-9519
2 Heat Treatment effect on Thermal properties of Al7075 alloys Elixir Journal of Mechanical Engineering 49(2012) 9849-9851
3 Effect of Heat treatment on the Coefficient of Thermal Expansion of Al7075 alloy-SiC particulate (5wt%) composites International Organization of Scientific Research (IOSR) Journal of Mechanical and Civil Engineering ISSN: 2278-1684 Vol.1 Issue 5, (July-August 2012) PP17-20
4 Effect of Thermal Ageing on the Coefficient of Thermal Expansion of Glass fiber reinforced Aluminium 7075 composites International Journal of Mechanical Engineering Research (IJMER) ISSN: 2249-0019, Vol.3, No. 4(2013), PP.278-281
5 A Study on the Effect of Heat Treatment on the Coefficient of Thermal Expansion of Heat treated Al7075 alloy and E-glass fiber (5wt%) Composites Indian Journal of Research in Commerce, management, Engineering and Applied Science October – 2016ISSN: 2454-6593
6 Solar Operated paddy Harvester International Research Journal of Engineering and technology (IRJET) ISSN: 2395-0056 Volume 6, Issue 03, March 2019 pp.4796-4799
7 Performance and emission analysis of compression ignition engine using biodiesels from Acid oil, Mahua oil, and Castor oil Heat Transfer—Asian Res.2019;1–14. https://doi.org/10.1002/htj.21642
8 Effect of diethyl ether additive in Jatropha biodiesel‐diesel fuel blends on the variable compression ratio diesel engine performance and emissions characteristics at different loads and compression ratios Heat Transfer. 2020;1–21. https://doi.org/10.1002/htj.21834
9 Combined effect of synthesized Waste milk skum Oil Methyl Ester and Ethanol Fuel Blend on the diesel Characteristics Journal Institution of Engineers India (springer)Ser. C https://doi.org/10.1007/s40032-020-00605-3
10 Application of Cyclone Seperator for Effect dust Removal in Paddy pouring Station International Journal of Emerging Technologies in Engineering Research (IJETER) Volume 8, Issue 8, August (2020)
II. INTERNATIONAL CONFERENCES
1 Comparative study on the Effect of Thermal ageing on the Coefficient of Thermal expansion of Al 7075alloy-Silicon Carbide particulate composites International Conference on Ceramics- (ICCIndia-2012),Govt.Engg.College, Bikaner, Rajasthan DECEMBER 12-13, 2012
2 Effect of Heat Treatment on the Coefficient of Thermal Expansion of Al7075 alloy-SiC particulate (9wt%) composites International Conference on “ Smart Technologies for Materials, Communication, Controls, Computing & Energy” (ICST 2013), Vel Tech Dr.RR& Dr.SR Technical University, Chennai in association with Oklohoma state university(OSU), USA JANUARY 3-5,2013
3 Effect of Thermal ageing on the Coefficient of Thermal Expansion of Glass fiber reinforced Aluminium 7075 composites World Congress on “ Frontiers of Mechanical, Aeronautical and Automobile Engineering, Indian Institute of Technology Delhi, New Delhi FEBRUARY 2-3, 2013
4 Effect of Heat Treatment on the Coefficient of Thermal Expansion of Aluminium 7075alloy-SiCp composites Second International Conference on Advances in Materials Processing and Characterisation (AMPC-2013), Dept. of Mechanical Engineering, College of Engineering Guindy, Guindy, Anna university, Chennai FEBRUARY 6-8, 2013

III. NATIONAL CONFERENCE

1. Effect of Heat Treatment on the Coefficient of Thermal Expansion of Al7075 alloy-SiC particulate (11wt %) composites National Conference on Advances in Mechanical Engineering (NCAME 2012), Dept.of Mechanical Engg., Mandsaur Institute of Technology, Mandsaur, Madhya pradesh NOVEMBER 26-27, 2012
2 A Study on the Effect of Thermal ageing on the Coefficient of Thermal Expansion of Heat Treated Al7075 alloy-SiC particulate composites National Conference on Condensed Matter Physics and Applications (CMPA-2012), Manipal Institute of Technology, Manipal, Karnataka DECEMBER 27-28, 2012
3 A Study on the Effect of Heat Treatment on the Coefficient of Thermal expansion of Heat treated Al 7075 alloy and SiC Particulate composites National Conference on Smart Materials and Technologies for Emerging Electronics(NC-SMTEE-2013) at Mangalore Institute of Technology & Engineering, Moodbidri, Karnataka MARCH, 8-9, 2013
4 Effect of Heat Treatment on the Coefficient of Thermal Expansion of Glass fiber reinforced Aluminium 7075 composites National Conference on Innovative & Emerging Trends in Engineering & Management (NCIETEM-2013), Alva’s Institute of Engieering and Technology, Moodbidri, karnataka MARCH, 22-23,2013

Conferences

1. Attended one day State level workshop on Engineering Graphics by VTU. Belgaum at KVGCE, SULLIA, on 3 /4 / 1999.
2. Attended Staff Development Programme on “Induction Training for Teachers in Engineering Education” sponsored by AICTE, New Delhi from 14-8-2000 to 2-9-2000. At KREC, Surathkal, Karnataka.
3. Presented a paper on the topic “Importance of Training the Employees in an Organization” during Technical paper presentation from 4-2-2001 to 7-2-2001 at Anjuman Engineering College, Bhatkal.
4. Attended two day National Seminar on “Innovation and Intellectual Property Creation in Indian Industry and Institute of Learning” from 22-1-2004 to 24-1-2004 at DCET, Hyderabad.
5. Attended two day International conference on “ Micro electro mechanical systems, MEMS – 08” at Anjuman engineering college, Bhatkal on 22-23, October,2008
6. Attended a one day workshop on “ Research methodologies and Report writing” at Gogte Institute of Technology, Belgaum on 25-26, May, 2009
7. Attended a two day workshop on “ MECHATRONICS” at Anjuman Engineering College, Bhatkal on 28th October, 2009
8. Participated in the 5-day Faculty development programme on Introduction to Nanotechnology held between 14th -18th December,2009 at PESIT, Bangalore
9. Attended two day national conference on “ MECHANICAL ENGINEERING TRENDS ” at Bellary Institute of Technology & Management, Bellary on 19-20, February,2010
10. Attended a one day workshop on “ APPLICATIONS OF TECHNOLOGIES FOR DESIGN IN INSTITUTION & INDUSTRY” at Anjuman Engineering College, Bhatkal on 3rd May, 2010
11. Participated and presented a paper titled “Detection of Petrol Adulteration by vibrational Method” at the National Conference on Advances in Mechanical Engineering, organized by the department of Mechanical Engineering, JNN College of Engineering, Shimoga, and Karnataka. During 24th& 25th ,September 2010
12. Attended 2 day faculty development programme on “ Recent Advances in Composite Materials” conducted at Shridevi Institute of Engineering and Technology, Tumkur, Karnataka on 25th and 26th of February 2011
13. Participated and presented a paper titled “Nanomaterials for Medical Applications” at the International Conference on Latest Trends in Nanoscience and Nanotechnology, organized by KBN College of Engineering, Gulbarga, Karnataka during 28th& 29th ,March 2011

Membership

MISTE, C Engg. (India)